Homemade chess with your own hands. DIY chess. Carved wooden chess

Chess is one of the most mysterious and greatest games of all times and peoples. Shrouded in ancient mystery, black and white figurines continue to haunt the minds of a huge number of people around the planet. The favorite pastime of sultans, kings, shahs, emirs and other powerful people of this world has not lost its relevance today.

Great game

However, the checkerboard order remains unchanged - 32 pieces (16 white / light and 16 black / dark) on a field with a corresponding cell marking of 64 squares.

It is not at all necessary to save up for gold chess, because today it can be made from literally anything. If you know how to carve wood, then it is quite easy to carve wooden figures with your own hands. It is even easier to cut them out of plywood or glue them from thick paper using a stencil.

Special craftsmen make chess sets from the insides of a computer (a motherboard for a board and chips in the form of figures), from electronic vacuum tubes, from plastic, glass, on LEDs or neomagnets, etc. Turn on your imagination - and go ahead.

How to make chess with your own hands: manufacturing options

One of the most popular options for homemade chess technology is cutting them out of plywood.

Take shape sketches, ruler, pencil, rail, plywood, and carbon paper. You will need to transfer the images onto plywood first. To do this, place a copy paper under the sketch and carefully trace all the shapes in full with a pencil.

The next step is to cut out the flat shapes that you drew with a jigsaw. The holes will also have to be cut out, having previously marked them: their thickness should correspond to the thickness of the plywood, and in length they should coincide with the length of the other product. The hole can be made with a drill or awl. At the joints, it is better to leave a margin of 1 mm so that the figures sit more densely.

You should have 32 figures and stands with holes - in the same quantity, and another 30 round parts-blanks for future checkers. All of them will need to be sanded with sandpaper.

Next, proceed with the assembly. Attach the figures to the stands using glue.
Then separate half of the elements and paint them with black acrylic paint. Leave them on for a while to dry.

The chessboard can be made from a piece of plywood (4 mm thick is suitable). You will also need slats. Saw out two blanks (400 * 200), and make frames from the slats - in the same quantity and in the same dimensions. Glue plywood blanks to them, and put hinges between the halves so that the board opens and closes well. Using a stencil, apply numbers, letters to the surface of the board, make a "cell" markup. And inside the board, you can draw a layout for playing backgammon. Paint over the sides with red acrylic paint.

For the figurines, take 3mm plywood. Make sure there are no cracks or knots on it. Apply the varnish in two layers to make the output color more presentable.

In order for chess to be voluminous, you will need more skills and abilities, since you cannot do without wood carving. For the light side, you can choose the following species: boxwood, birch, ash, maple, hornbeam, and for the dark side, walnut, ebony, apple and others are well suited. If it is not possible, then it is easier to make all the figures from linden, for example, and then burn or varnish.

Using the "Dutch" thread, you can do without a lathe. To do this, you will need square bars of various sizes: blanks for future figures:

cut out chess stencils from cardboard and transfer them to the edges of the blanks (for a horse you need two views - from the side and from the front);

to get the profile of the figure's leg, drill it by holding the workpiece in a vice (for different figures you will need drills of different sizes);

cut out the shapes along the outlined lines using a jigsaw (follow the profile of the adjacent edges and leave bridges on them);

carefully cutting out all the figures, remove excess wood and file the surface with a file (you can grind with a sandpaper);

ready-made chess must be soaked in hot linseed oil and covered with an appropriate varnish (black pieces will first need to be tinted with stain). To make them stand better on the board, you can glue pieces of felt, plush or thin suede on the legs.

Having the desire and imagination, it is easy to make chess from paper using the origami technique, and from wine crusts or bottle corks, and even mold from plasticine.

Some nuances

But the most common size of figures is considered to be the classic measurement: the king is about 7-10 cm high, while other figures decrease in size, depending on what rank they are. Consider the height of the base when working.

Great game

However, the checkerboard order remains unchanged - 32 pieces (16 white / light and 16 black / dark) on a field with a corresponding cell marking of 64 squares.

How to make chess with your own hands: manufacturing options

One of the most popular options for homemade chess technology is cutting them out of plywood.

Take shape sketches, ruler, pencil, rail, plywood, and carbon paper. You will need to transfer the images onto plywood first. To do this, place a copy paper under the sketch and carefully trace all the shapes in full with a pencil.

The next step is to cut out the flat shapes that you drew with a jigsaw. The holes will also have to be cut out, having previously marked them: their thickness should correspond to the thickness of the plywood, and in length they should coincide with the length of the other product. The hole can be made with a drill or awl. At the joints, it is better to leave a margin of 1 mm so that the figures sit more densely.

You should have 32 figures and stands with holes - in the same quantity, and another 30 round parts-blanks for future checkers. All of them will need to be sanded with sandpaper.

Next, proceed with the assembly. Attach the figures to the stands using glue.
Then separate half of the elements and paint them with black acrylic paint. Leave them on for a while to dry.

The chessboard can be made from a piece of plywood (4 mm thick is suitable). You will also need slats. Saw out two blanks (400 * 200), and make frames from the slats - in the same quantity and in the same dimensions. Glue plywood blanks to them, and put hinges between the halves so that the board opens and closes well. Using a stencil, apply numbers, letters to the surface of the board, make a "cell" markup. And inside the board, you can draw a layout for playing backgammon. Paint over the sides with red acrylic paint.

For the figurines, take 3mm plywood. Make sure there are no cracks or knots on it. Apply the varnish in two layers to make the output color more presentable.

Using the "Dutch" thread, you can do without a lathe. To do this, you will need square bars of various sizes: blanks for future figures:

cut out chess stencils from cardboard and transfer them to the edges of the blanks (for a horse you need two views - from the side and from the front);

to get the profile of the figure's leg, drill it by holding the workpiece in a vice (for different figures you will need drills of different sizes);

cut out the shapes along the outlined lines using a jigsaw (follow the profile of the adjacent edges and leave bridges on them);

carefully cutting out all the figures, remove excess wood and file the surface with a file (you can grind with a sandpaper);

ready-made chess must be soaked in hot linseed oil and covered with an appropriate varnish (black pieces will first need to be tinted with stain). To make them stand better on the board, you can glue pieces of felt, plush or thin suede on the legs.

Having the desire and imagination, it is easy to make chess from paper using the origami technique, and from wine crusts or bottle corks, and even mold from plasticine.

Some nuances

As you can see, making chess with your own hands is quite simple. It doesn't matter what material or theme you choose for your set, the main thing is that it will be created with love and soul, which means that the "royal game" will slightly reveal its innermost secrets to you ...

The chessboard is perhaps the most common and popular subject for those beginner craftsmen who are starting to master the skills of veneering. You don't need a high level of skill and sophisticated equipment to make your own chessboard, but tools nonetheless. must be of high quality and well sharpened.

In order for a do-it-yourself chessboard to be in no way inferior to the purchased product and to have an aesthetic appearance, it is necessary to ensure that there are no gaps at the joints of the parts - this can be achieved only with the help of impeccable sharpening of a veneer cutting knife. For this reason, the tool is the first thing to take care of before getting started.

Materials and tools

To make a chessboard you will need:

plywood for the base;
dark and light veneer;
joiner's glue;
varnish;
duct tape;
veneer knife;
steel ruler;
cutting board with support rail;
sandpaper;
blade straightening bars

How to make a chessboard

We make two square templates from plywood 5 mm thick, which will determine the width of the cut veneer strip. Using double-sided tape, attach these template squares to the ends of the support rail on the cutting board. We put a veneer sheet on the board, resting its edges against the support rail and the template.

To prevent slipping, we also abut the steel ruler with our edges against the template. Moving a sharp knife along the ruler, cut the veneer strips. At this stage, it is important to remember that the veneer is cut in several strokes, and not one at once.

Next, squares are cut, laying strips of dark and light veneer on the board. For convenience, an additional support rail with a thickness of about 3 mm can be fixed on the board. Be very careful when cutting across the grain. Light veneer is usually easier to cut, but in dark veneer the blade of the knife can get stuck. To make the playing field, you will need 8 assembled strips of 8 squares alternating in color. It should be remembered. that the size of the playing field depends on the size of the chess pieces.

Sticking the field elements will be much easier if the dark and light squares are first connected together with transparent adhesive tape or even just a strip of plain paper. The edging of the playing field and the finishing of the ends of the checkerboard are performed with narrow veneer strips. It is convenient to cut such strips on a cutting board if you install small support pegs of the desired size on it.

An important point: when cutting strips to border the playing field, the ruler must be located strictly at an angle of 45 degrees. Any deviation from this value will adversely affect the appearance of the product.

Chess is one of the oldest and most magnificent games. They are adored by people of all ages and social status. This game was invented in India and quickly spread across all continents and countries. Whole generations of people fell in love with chess because of its unpredictability and variability. Nowadays, many international competitions are held on this game. Thousands of people from all over the world are fighting for the chess crown.

This game helps to develop logical thinking and the ability to calculate your actions in advance. Chess is made from a wide variety of materials. There are figurines made of gold and other noble metals, precious woods, crystal, ivory and other expensive materials. Since most of these chess are not affordable, you can buy made of the simplest materials or do it yourself.

Chess board made of paper

To make it, you will need the following materials:

two white sheets of A3 paper;
Scotch;
pencil;
ruler.

Procedure:

This board is best placed on a table or magnetically attached to a metal board.

DIY chess

Any variation of the game provides for the presence of 16 white and as many black pieces. They play on a board lined with 64 equal squares.

Figures can be made from the following materials:

tree;
clay;
paper;
plywood, etc.

Before you start making, you need to understand how to make a paper checkerboard.

Plywood

One of the simplest and most popular options for creating chess is cutting out figures from plywood.

The process is as follows:

Instead of classic figures, you can cut out chess with your own hands for children. The objects can be characters from cartoons, fairy tales, games.

Polymer clay figurines

Polymer clay is ideal for crafting durable and colorful items. Crafts on the topic of chess created with its help will look beautiful and original and will serve you for many years.

To make chess, you need to follow these steps:

You can also use plasticine as a material for chess..

Wooden chess

To create wood figures, you will need the skills of a carver or carpenter. A beginner can take a simple branch as a blank and make cylinders out of it. Then cut out simple insignia on them. This work can be done with a chisel or a sharp knife.

If you are a professional carver, then all that limits you is your imagination. Wood carvings can be used to create figurines of stunning beauty and bizarre shapes. Made by top-class craftsmen, chess is often sold at auctions for huge sums of money.

In addition to chess, wooden checkers also look beautiful. They are made according to pre-planned and selected sizes. You will always want to play several games with such figures. You can also make carved backgammon out of wood with your own hands, the drawings and dimensions of which will not differ much from checkers.

Paper figures

This option for making figurines is the simplest and cheapest. To implement it, you need to do the following:

If you are using a flat board for playing on the table, then magnets do not need to be glued to the figures. Having learned how to make chess, it is easy to guess how to make checkers out of paper with your own hands. To do this, you need to repeat all the same actions, only with checkerboard patterns.

Products from strips of paper

Making figures using the quilling technique is gaining popularity every day. Chess is no exception. In order to twist them from paper strips, you need to take the following steps:

Making chess with your own hands is quite simple and interesting. It doesn't matter which method you choose, the main thing is that it will help you join the great game.

Attention, only TODAY!

Black and white love: how can you make original chess with your own hands? / DIY toys, patterns, video, MK

Great game

Chess helps to learn to think logically, calibrated, calculate your actions and deeds many steps forward. There are various variations of materials for figures and boards: they could be made of gold and other precious metals, black, red or ebony, ivory, crystal, inlaid or decorated with precious stones, mother of pearl and gems. In the same way, many variants of execution are known: in the form of fighting armies belonging to one or another historical era, in the form of famous people, various animals, characters from favorite films, etc. However, the checkerboard order remains unchanged - 32 pieces (16 white / light and 16 black / dark) on a field with the corresponding cell markings of 64 squares. It is not at all necessary to save up for gold chess, because today they can be made from literally anything. If you know how to carve wood, then it is quite easy to carve wooden figures with your own hands. It is even easier to cut them out of plywood or glue them from thick paper using a stencil.

Special craftsmen make chess sets from the insides of a computer (a motherboard for a board and chips in the form of figures), from electronic vacuum tubes, from plastic, glass, on LEDs or neomagnets, etc. Turn on your imagination - and go ahead.

How to make chess with your own hands: manufacturing options

One of the most popular options for homemade chess technology is cutting them out of plywood.

Take shape sketches, ruler, pencil, rail, plywood, and carbon paper. You will need to transfer the images onto plywood first. To do this, place a copy paper under the sketch and carefully trace all the shapes in full with a pencil.

The next step is to cut out the flat shapes that you drew with a jigsaw. The holes will also have to be cut out, having previously marked them: their thickness should correspond to the thickness of the plywood, and in length they should coincide with the length of the other product. The hole can be made with a drill or awl. At the joints, it is better to leave a margin of 1 mm so that the figures sit more densely.

You should have 32 figures and stands with holes - in the same quantity, and another 30 round parts-blanks for future checkers. All of them will need to be sanded with sandpaper.

Next, proceed with the assembly. Attach the figures to the stands using glue.
Then separate half of the elements and paint them with black acrylic paint. Leave them on for a while to dry.

The chessboard can be made from a piece of plywood (4 mm thick is suitable). You will also need slats. Saw out two blanks (400 * 200), and make frames from the slats - in the same quantity and in the same dimensions. Glue plywood blanks to them, and put hinges between the halves so that the board opens and closes well. Using a stencil, apply numbers, letters to the surface of the board, make a "cell" markup. And inside the board, you can draw a layout for playing backgammon. Paint over the sides with red acrylic paint.

For the figurines, take 3mm plywood. Make sure there are no cracks or knots on it. Apply the varnish in two layers so that the color at the output is more presentable. To make the chess volumetric, you will need more skills and abilities, since you cannot do without wood carving. For the light side, you can choose the following species: boxwood, birch, ash, maple, hornbeam, and for the dark side, walnut, ebony, apple and others are well suited. If it is not possible, then it is easier to make all the figures from linden, for example, and then bake or varnish. Using the "Dutch" carving, you can do without a lathe. To do this, you will need square bars of various sizes: blanks for future figures:

cut out chess stencils from cardboard and transfer them to the edges of the blanks (for a horse you need two views - from the side and from the front);

to get the profile of the figure's leg, drill it by holding the workpiece in a vice (for different figures you will need drills of different sizes);

cut out the shapes along the outlined lines using a jigsaw (follow the profile of the adjacent edges and leave bridges on them);

carefully cutting out all the figures, remove excess wood and file the surface with a file (you can grind with a sandpaper);

ready-made chess must be soaked in hot linseed oil and covered with an appropriate varnish (black pieces will first need to be tinted with stain). To make them stand better on the board, you can glue pieces of felt, plush or thin suede on the legs.

Having the desire and imagination, it is easy to make chess from paper using the origami technique, and from wine crusts or bottle corks, and even mold from plasticine.

Some nuances

The set of chess can be very large: such pieces are considered outdoor or garden pieces. That is, they can be placed as an element of landscape design to play a party or two in the fresh air. There are also mini-sets that are easy to take with you on the road or on a trip, but the most common size of figurines is the classic measurement: the king is about 7-10 cm in height, while other figures are reduced in size, depending on what rank they are. Consider the height of the base as you work. As you can see, making chess with your own hands is quite simple. It doesn't matter what material or theme you choose for your set, the main thing is that it will be created with love and soul, which means that the "royal game" will slightly reveal its innermost secrets to you ...