Computers

A command to prevent items from falling out in Minecraft

Today we will find out which command is used to prevent items from falling out in Minecraft. The spaces of the worlds of this game are saturated with swarms of hostile mobs and a host of dangers, which in every possible way interfere with the successful passage of the path. It is especially difficult for a gamer to get into the Edge, the Lower World or Space. Death lies in wait here at every step, which in itself gets on the nerves, plus everything else, in parallel with death, absolutely all the accumulations gained in the course of the mission are lost: from clothes to inventory.

Where does the player end up after the fiasco?

If you are interested in what command is used so that things do not fall out, first of all you should know that there is a concept of a "spawn point" in the game. This means the appearance of a new character. A point is a specific location with specific coordinate data. If the scenario is unsuccessful, the restoration takes place in the wrong place. According to the Minecraft scenario, a spawn point can occur on any site, as long as it is located above sea level. When something interferes with this, for example, water spill or lava coming to the surface, the search continues until a suitable position is found.

Spawn relocation

The command to keep things from falling out is incredibly important, because in Minecraft, lethal outcome can happen anywhere. But at whatever point this happens, you will have to return to where it all began. The usual transfer of the spawn point will help to avoid an unpleasant moment. We put the character on the bed where there is a desire to resurrect him. The starting point will be automatically transferred to the coordinates of the bed, and thanks to the presence of a recovery code, the hero's property after his death will be saved in a special chest.

Related Videos

Preservation method

Which team can do this? The player does not drop things, which means that he has a lot of chances to win. In principle, all accumulations can be collected at the place of death, because at a fateful moment they fall out and remain there, without disappearing anywhere. However, this move is easy to do in theory, in practice everything is much more complicated and not worth the effort. The only sure way to save things is to use a cheat code. Enter / gamerule keep Inventory true on the command line. This will fully protect against annoying losses.

The command line is accessed by pressing the "T" key on the keyboard. True, experienced gamers resist such tricks. Realizing that it is easy and simple to return to the game, the process loses its sharpness. The player is not afraid of losing property, does not act as carefully as usual, does not calculate the consequences of the measures being taken - and as a result, interest in the toy disappears. Think before entering the cheat code. In any case, now you know which command is used so that things do not drop out.

In the modern world, almost every person who is fond of computer games has heard about Minecraft. This is an incredibly popular sandbox, in which you are invited to survive in a huge interactive world where you need to get materials and food for food, build houses, create tools and weapons for yourself, and also do a huge number of other exciting operations. And, of course, you need to fight opponents who only dream of destroying you. What does this threaten? And what can you do after your character dies? This is what will be discussed in this article. The main theme is a command so that things do not fall out after death.

What happens after death?

In this article, you will learn about the fact that there is a command so that things do not fall out after death. Therefore, it is worth taking a closer look at what happens if your character fails to defeat the enemy and he dies. Fortunately, you don't have to start the entire game from the beginning. Your character respawns at the checkpoint. If you are an experienced player, then you should already know that you can always set a checkpoint yourself so as not to respawn at the default point. However, this article is not about this, but about what happens to your things.

So, when your character dies, all your items drop out and remain at the place of the hero's death. Naturally, this is very unpleasant, because many gamers collect certain items for a very long time, and do not want to lose them at all. Fortunately, there is a team to prevent items from falling out after death. It is about her that will be discussed in this article.

Helpful command

What does the team look like so that things do not fall out after death? This is a fairly simple combination that will allow you to fix this annoying problem right away. Naturally, first, you need to make sure that you have cheat mode enabled. This can be done in the main menu. Unfortunately, you cannot activate this mode at any time; you need to do this only at the moment of creating a new world.

So, if you have cheats enabled, then in the console you need to register the / gamerule keepInventory command, for which you need to set the status to true. Immediately after that, you can calmly fight with all opponents, because your inventory will still remain with you even after death. If you want to increase the level of difficulty, then you can always replace the status true with false, and then things will start falling out again after death.

Server game

Now you know that there is a team to prevent items from falling out in Minecraft. However, it will only work in a single player game. In a multiplayer game, this command will be considered a cheat, and you can get banned very quickly on the server. Unfortunately, there is no full-fledged analogue of such a command on the server, but there is a workaround. The fact is that on some servers, gamers can use the / back command to teleport to the last place where you were. This command will help you find yourself in the same place where you just died. But remember that opponents can still be there, so be prepared for potential problems that may arise after using this command.

As any player knows, the universe is filled with numerous types of various monsters, otherwise called mobs, stumbling upon which, even in the later stages of the game, you can be killed. Therefore, sometimes a command in Minecraft so that things do not drop out at death is very useful. Moreover, there are other ways to die: a banal fall into lava can lead to certain death. The hero can be crushed by blocks while working in the mine or fall from a great height ...

These cases are not so rare, and there is no way to be insured against them. You can only hope for your own luck and attentiveness. Among advanced gamers, a team has long become a popular team to protect things from falling out at death. They need it as much as possible, because diamond things, obtained by a difficult and long way, do not want to lose at all due to stupid bad luck.

Let's take a look at how to use this command and find out other useful things to cover. Let's start with the concept of "spawn point" - in other words, the place where you spawn at the beginning of the game or after death. It has specific coordinates and can be specified by a separate command.

It often happens that, by default, at the beginning of the game, the character appears in a not very suitable or even life-threatening place, inhabited by various mobs that can kill the player immediately after his appearance. You can even be surrounded by lava, which will be difficult to get around. It is then that the command to save the inventory is needed - no one and under no circumstances will knock your "treasures" out of you, no matter how many times you die.

If you are convinced of the usefulness of this command, you should start entering it. This is quite simple to do, especially if you have already entered any codes before in the Minecraft game. When entering any card or server, you need to enable input mode and specify the following command:

Please note that there must be a "/" in front of it. If everything was done correctly, on the next death all items in your inventory will remain in their places!

We hope the information in the article was useful to you! If you wish, you can rate with the article or leave a comment. Thank you for the attention!

Video

We are waiting for your comments, feel free to write!

Minecraft is a game that offers you almost endless possibilities. However, there are also commands that you can use to further expand the functionality, add some aspects not available in the original version, and so on. Commands are entered into the console. Moreover, there are standard combinations that work in any conditions, as well as special ones that can be activated only if you checked the "Enable cheats" box when creating the world. The most interesting and powerful teams fall into the second category. Among them there is also the preservation of things. What is it and how to use it? This is what will be discussed below.

What does the command give?

To begin with, it is worthwhile to figure out what the Minecraft command can give you to save things, since from its name it is not entirely clear what exactly it can offer you. It is worth starting from the very beginning - when you travel around the game world, there is a possibility that you will die, because various natural traps, as well as frightening monsters, await you everywhere. After death, you will respawn at the spawn point, but your inventory will be empty - all items will be lost. Naturally, no one likes this, and it is to eliminate such situations that the Minecraft team exists to preserve things. After activating it, you can die in peace - all your things will be with you when you reappear at the respawn point. But what does this command look like? Unlike many simple combinations, this one is quite complex and needs to be taken apart piece by piece.

Gamerule

So, as you already understood, the "Minecraft" command to save things is entered in the same way as everyone else - through the game console. Having opened it, you need to type the "/" icon - it is with it that any command begins. This is what distinguishes them from regular text messages. After that, you will need to enter the gamerule command - this is only the first part. So don't activate it right away. Since it will not lead to anything. With this command, you can set various game rules that relate to your world and gameplay. You just need to know the various codes that need to be entered after this command in order to achieve this or that effect. At the moment, you only need to know what things are available to save.

Keepinventory

With the first part of the team, everything is clear - it's time to move on to the second. If the first makes the system understand that some rule of the game world will be changed, then the second concretizes this change. for things are very diverse, but you need to choose one specific one - keepInventory. Connoisseurs of the English language can already understand by the name what it means. This command will keep things in your inventory after you die. But what else is there to enter to complete the command?

True and False

The last part of the command sets the state of the rule, which was specified in the previous part. If you write true, then the rule will be applied in your game world, and if you change this value to false, then it will not be applied. Thus, if you want your items from the inventory to be saved after death, you need to open the console and enter the command gamerule keepInventory true. From now on, in your world, the character will retain all his belongings after death, until you decide to change the value from true to false. Now you know an effective way to save things, and it will become much easier and more fun for you to play. And that will give you a boost to further explore both the commands and the game rules that you can apply with them.

Today we will find out which command is used to prevent items from falling out in Minecraft. The spaces of the worlds of this game are saturated with swarms of hostile mobs and a host of dangers, which in every possible way interfere with the successful passage of the path. It is especially difficult for a gamer to get into the Edge, the Lower World or Space. Death lies in wait here at every step, which in itself gets on the nerves, plus everything else, in parallel with death, absolutely all the accumulations gained in the course of the mission are lost: from clothes to inventory.

Where does the player end up after the fiasco?

If you are interested in what command is used so that things do not fall out, first of all you should know that there is a concept of a "spawn point" in the game. This means the appearance of a new character. A point is a specific location with specific coordinate data. If the scenario is unsuccessful, the restoration takes place in the wrong place. According to the Minecraft scenario, a spawn point can occur on any site, as long as it is located above sea level. When something interferes with this, for example, water spill or lava coming to the surface, the search continues until a suitable position is found.

Spawn relocation

The command to keep things from falling out is incredibly important, as in Minecraft it can happen anywhere. But at whatever point this happens, you will have to return to where it all began. The usual transfer of the spawn point will help to avoid an unpleasant moment. We put the character on the bed where there is a desire to resurrect him. The starting point will automatically be transferred to the coordinates of the bed, and thanks to the presence of the recovery code, the hero's property after his death will be saved in a special chest.

Preservation method

Which team can do this? The player does not drop things, which means that he has a lot of chances to win. In principle, all accumulations can be collected at the place of death, because at a fateful moment they fall out and remain there, without disappearing anywhere. However, this move is easy to do in theory, in practice everything is much more complicated and not worth the effort. The only sure way to save things is to use a cheat code. Enter / gamerule keep Inventory true on the command line. This will fully protect against annoying losses.

Access is opened by pressing the "T" key on the keyboard. True, experienced gamers resist such tricks. Realizing that you can return to the game easily and easily, the process loses its sharpness. The player is not afraid of losing property, does not act as carefully as usual, does not calculate the consequences of the measures being taken - and as a result, interest in the toy disappears. Think before entering the cheat code. In any case, now you know which command is used so that things do not drop out.