How to add maps to minecraft. How to install maps in minecraft

Do you own your own server in Minecraft? But you are not able to build something worthwhile on your own, and your friends are tired of playing in the monotonous world of "Minecraft"? No problem! In such cases, there is only one way out - download and install the map you like on your server. Especially for you, many players are working on the creation of maps. You just have to find and download the one you need. Next, you need to transfer it to your server. And how to install a map in Minecraft, will be described in this article.

First, let's figure out what they are. In Minecraft, a map is a kind of system consisting of directories and files of various types, which carries information about the blocks and their location. Maps can be generated an unlimited number of times, but they have a limited size: for example, the tallest building should not exceed 256 blocks in height, and the entire map should not be more than 13 million blocks. But don't be upset, 13 million blocks is a lot. It will take a player several days to research a map of 2-3 million blocks, and what can we say about 13 million. Maps are multiplayer and single player. It is easy to guess that the main criterion for this division is the number of players.

Before you install a map in Minecraft, you need to decide on its choice. It's simple. Maps in Minecraft are a very good thing. There are "adventure" cards, there are cards for passing. If your main goal is to complete all challenges alone or with friends, maps in Minecraft are a very fun task. And there are cards that carry nothing but a beautiful design. Here you just have to admire the buildings. Hand-built cards are considered the most valuable, and they are often the most beautiful. They are created without various generators and are used to progress through the game.

Now let's move on to the question: "How to install a map in Minecraft?" The answer to this question is very simple. By the way, I must say right away that there are two types of map installation: in single-user and multi-user modes.

Option 1

The multiplayer mode suggests that for it you need to find a map that must support multiplayer (therefore, the choice is significantly narrowed). Then you need to unzip the archive (most often maps are downloaded as Winrar), then you need to copy all the files from the archive to the / minecraft / world / folder. If you need to replace files, do not be afraid, replace them calmly. Then start your server and wait for the map to fully load. Loading times vary by map size, so be prepared for long wait times.

Option 2

In single-player mode, you also need to download a map, but absolutely any map comparable to your version of the game will do. Then you need to find the "saves" folder. On Windows 7, this folder can be found as follows: write% appdata% in the search bar, then find the .minecrsft / saves folder, and then transfer all the files from the archive to the found folder. On Windows XP, this folder can be found by typing "Run" in the search box, and in the window that opens, write: "% appdata%", then - you know.

This concludes the article, I hope I helped you with a solution to the question of how to install a map in Minecraft.

This article will focus on how how to install maps in Minecraft... Suppose you downloaded a beautiful card from the Internet that you would like to play in a single or with friends, or a friend threw you his creation, not the point. We just want to play it. The Minecraft Russia site team has prepared instructions for you, thanks to which each of you can easily install absolutely any map.

So, we have downloaded the map we need. Most likely it will be a .zip or .rar archive

We open it with any archiver. Any files and folders can be inside, but we are only interested in the folder in which the file is located level.dat... All of it is the world of Minecraft.

Let's analyze a little the structure of the world:

• V level.dat information about the spawn point, world weather, side, difficulty, world name, world generator version, game version and several other equally interesting parameters is stored.
• In folder region are kept .mca(before Minecraft 1.2 - .mcr) files containing information about blocks in the world. That is, in fact, what we see lies here. One .mca file contains 16x16 chunks and represents one region.
• In folder players are kept .dat files with data about players. Inventory, location on the map, bed placement point, hunger level, experience - all this is carefully stored in the format NBT... Naturally, if you delete the .dat file with the player's nickname when he is not in the game, then Minecraft will "forget" about this player, and as soon as he enters the game again, it will be completely empty at the spawn point.
• In DIM1 and DIM-1 other measurements are stored such as Lower world and Edge.
• data stores various information, for example, data about villages, as well as in-game maps that players have crafted.
• File session.lock does not allow two running copies of Minecraft to modify the map files, in order to avoid errors on them. If this protection mechanism did not exist, then with a banal mistake or inattention, you could lose your world forever.

Installing the card

The entire folder with the above elements must be copied to the folder saves which is located in the Minecraft folder.

In order to open the folder with Minecraft, click Start-> Run (or the key combination Win + R), and then drive in there

For the future, this is the root directory of the game and you will have to come here often.

Folder with Minecraft in other OS:

• Linux - /home/%username%/.minecraft
• Mac OS X - users /% username% / Library / Application Support / .minecraft(if the Library is not visible, you need to press cmd + Shift + G and write the path there)

Helpful Hint: You can open the game folder even faster! How? If Minecraft is already running, then you just need to go to the menu item " Texture packs"(in the options menu, and in older versions it is in the main menu), then press the button" Open folder", after which, in the window that opens, go to a higher level and voila - we are in the folder .minecraft

After you have copied the map to the saves folder, you can start the game, select a new map and play on it. It's very simple, isn't it?

Installing the map on the server

Here we have 2 ways, both are very simple:

1. Rename the folder with the map to world and drop it into a folder from the server, after deleting / moving the old one world
2. Copy the folder with the map to the folder with the server, then in the file server.properties edit the "level name" property by driving in the name of our map folder

So we learned install minecraft maps... As you can see, nothing complicated.

Instructions

If you feel that Minecraft in its classic incarnation is starting to bore you a little, try playing it on maps other than the standard one. You will find that the choice is unusually wide. You can test your "minecraft" skills on a distant planet or on an abandoned intergalactic station, on flying islands (where there is a high risk of falling into an abyss, losing all your inventory), on a land teeming with pirate treasures and numerous dangers, on a medieval estate, on a huge an airship or a ship, in a tangled maze (full of hostile mobs), in twin towers, etc. The choice in this case is solely yours.

Find on any of the sites that offer software for Minecraft (including numerous add-ons to it) a map that suits your needs and ideas about the ideal gameplay. Just refer only to those sources that are trustworthy. Taking a card from a dubious portal, you may face the fact that it is at least inoperative, and at most, the file with it is infected with a virus. Therefore, carefully check the resource from which you plan to download this kind of material (for example, ask about it from those gamers whose opinion you trust). Only after that, take the risk of taking an archive with a map from there.

In the event that you are not satisfied with the ready-made cards, create your own. Use various mods for this (Too Many Items, Single Player Commands, Zombies Mod Pack, etc.). Come up with an interesting storyline, set the rules (make them visually, on), write in the original name, mark the spawn point of the players and make a starter kit for each of them. Be sure to check if your card is functioning normally. Now get down to installing it. This is done in the same way - regardless of whether it was developed by you personally or downloaded from some resource in a finished form.

If the card is presented in the form of an archive, first unpack it using a special program (WinRAR, 7zip, etc.) - otherwise you will not be able to install it normally. Now find the saves folder in your .minecraft. To search for the game directory, go to the C drive in the Users folder (for 7, 8 or Vista versions of Windows) or Documents and Settings (in XP). Find your username in it, open Application Data there - and you will see the directory you are looking for. Transfer the folder with the map to saves. Make sure that its name does not coincide with those already there. Now start the game, click on Single Player from the menu and then select the name of the card you just installed.

It often happens that you and your friends stop playing Minecraft multiplayer mode, after which everyone starts building their own map. However, you do not have to leave your buildings and works, because you can simply transfer them to single-player mode and continue to create. In this article, you will learn how to load your map into Minecraft as quickly as possible.

Downloading the map

First, download the map you need from the server or from the site. For example, let's take a service with a large number of maps https://minecraft-files.ru

You can load the downloaded map into single player mode for your own game, or simply transfer it to a new server or hosting to continue playing with your friends. The second option is much easier, since you should already be familiar with the hosting device, since you have played with them before. Moving a map to single player is a little trickier.

Root folder actions

While the archive is downloading, you need to find the root folder of Minecraft. It is located in the hidden folder AppData. If system folders are hidden on your computer, then you will not see it. Read more about this topic in another article.

Go to Local Disk and then to the Users folder.

In the users folder, select the one with your username. Find AppData and go to it.

Select “Roaming” from the three directories.

This is where the ".minecraft" folder is located, where you work with mods, maps, profiles and pretty much everything related to this game. As you already understood, you won't be able to change something in Minecraft with hidden system folders. Enter the root folder.

Among all the libraries, you only need the “Saves” folder. This contains all the cards you've already created in single player mode. You just have to copy the desired card here for the game.

Open the archive with the map and drag the folder to “Saves”. This will take some time if the map was large and well-mastered.

Some features of installing the card

Once the copying is complete, you can enter the game and check if it works.

Please note that some maps will not work on other versions of Minecraft. If you played on version 1.9, then when loading the map, you need to select this version. In almost all launchers, the version of the game can be selected in the lower left corner.

Also, if you played on a server with many plugins that opened up new game features, for example, added new items and locations, then you will not see the innovation in single player mode.

Go to the "Single player" mode.

As you can see, in the selection of worlds appeared the one that you just moved to the root folder of the game. Select it and click “Play Selected World”. You will immediately find yourself in the old map already familiar to you.

Do not forget that you can move the map not only to single player mode, but also to a new server. For example, if you played with friends on your host, but decided to try another one, because you didn't like the conditions in the past. You just download the map and transfer it to the new server. Of course, in this case, the archive needs to be unpacked not on your computer, but in special folders on the hosting. In general, the procedure looks exactly the same.

Start a single player game. Launch Minecraft, and then from the main game screen, click "Singleplayer". It's in the lower right side of the screen.

Change the game mode to Creative Mode. Below the Name field is the Survival Mode button. Press this button twice to change the text to Creative Mode.

• Creative Mode offers the player everything they need to create a map, including where monsters spawn and the ability to instantly destroy any block.