How to light a lamp in minecraft. How to make a lamp in Minecraft and how does it work

The lamp is a very useful item in Minecraft. Its most popular counterparts are fire, torch, and glowing stone. However, of all these options, the use of the lamp is the most convenient.

If you use a lamp, and not torches, to illuminate a self-built house, then the effect will be much better. You just need to know how to do it.

Creating a lamp in Minecraft

The glowing stone can be found either ready-made in the Nether world in the game, or you can make it yourself. This will require the following elements: light dust; witch.
Red Dust can be obtained from Red Ore with a Pickaxe.
It is not so easy to build such a lamp in Minecraft. The following game components will be needed: red dust - 4 pcs .; lightstone - 1 pc.
The witch will be necessary for the crafting itself, but finding her in the game is extremely difficult. Because of this, making a lightstone will not be very easy, for the same reason, creating a lamp is not an easy task.
On the crafting grid, you need to knead a lightstone, placing it in the center, and place 4 blocks of red dust around it.
The glow of such a lamp will have a maximum level of 15. In brightness it surpasses the torch, and in strength it is equal to the lamp. One such light bulb is capable of illuminating about 15 game blocks.

Activating the lamp in the Minecraft game

After making the lamp, you need to activate it. This is done very simply and in several ways. Let's consider them sequentially.

With pressure rails. They are pre-crafted from iron ingots, stone plates and red dust. On the crafting grid, the red dust should be around the other two elements.
By pressing a button, which is created from two stone blocks.
With the help of circuits composed of red stone, which provide the ability to carry out various transformations.
When using a lever. To create it, you will need cobblestones and a stick. On the crafting grid, they are located in any order.

Each of these types of switches can be located directly on the lamp itself. The connection is carried out in a standard way so that the signals come from adjacent blocks either from below or from above. If a signal is received and everything is configured correctly, then the lamp starts to glow. In the case when the lamp is off, you need to check the connection for serviceability.

additional information

If the lamp is located on a farm, then it can be used to grow the crop, and then harvest it.
Such a lamp in the game is not afraid of water.
However, some problems may arise with this device, for example: when the lamp is activated on the street, lags sometimes occur; the device can work only when transmitting signals from red stones, despite the fact that the lamp belongs to the "glass" type.

It's extremely uncomfortable in the Minecraft world at night. And of course, the gameplay offers us a varied selection of items that can be used to illuminate the home.

Choice

The choice of lamps is diverse. Here's a partial list of what you can do to light your home: Torch, Jack's Lamp, lava, glowing stones, fire and a lamp.

The lamp in Minecraft does not look like in life, it is a luminous block, which has its very place in the dwelling you have created. Today we'll talk about how to create it.

Crafting a lamp

Crafting in Minecraft is not an easy task. To create the lamp, we need red dust and a glowing stone. Red dust is relatively easy to get - with a pickaxe and red ore, but you have to tinker with a lightstone. As a final ingredient, it is found in the nether worlds and resembles coral. In any case, you will need a portal to Hell to craft it from light dust, but this will require a witch, but this should not stop you.

To create a lamp, you need one glowstone and four pieces of red dust. It burns brighter than a torch, spreading light over fifteen blocks. Can make snow and ice melt.

Lamp activation

In addition to crafting a lamp, you will have to activate it. For this you need:

Two stones for creating an activation button

Redstone circuits
Pressure rails
Levers. Crafted from a stick with a cobblestone

The rules for connecting switches to a lamp are standard: the signal must come from any neighboring block.

Under the light of a lamp, crops can be grown on underground farms. Also the lamp is waterproof and can be floated with.

Like all devices in Minecraft, the light bulb and the corresponding bugs have not passed:

When you turn on the lamp on the street on old PCs, lags begin.
The lamp can conduct a signal from a red stone, although the type itself is glass.

Video lessons

Lighting in Minecraft is one of the main tasks facing the player. Why? Because mobs do not spawn in the light. The more you illuminate the area, the less chance that a monster will appear next to you. Of course, you can use regular torches, but their illumination radius is much smaller than that of a lamp. So, how to make a lamp in Minecraft?

Materials (edit)

In fact, we will not need so many raw materials to manufacture the item in question. The lamp in Minecraft is crafted from the following ingredients.

Red dust. You can get it by breaking red ore blocks. There is also some chance of getting dust when killing a witch.
Luminous stone. It is mined in two ways. If you have a "silk touch" pickaxe, then you can easily collect ready-made blocks. If you have a regular tool, then break the blocks and collect the glowing dust. From four handfuls, you can craft a solid stone.

That, in fact, is all that Minecraft will require of us. How to make a lamp, see below. The main thing is to remember that one lamp requires four handfuls of red dust and one block of glowing stone. So stock up on everything you need at once.

Craft

Having collected everything we need in our inventory, we go to our workbench. We spread the materials on it.

Place a glowing stone in the very center.
Spread red dust on the sides.
The corners of the workbench remain empty.

As you can see, you should have a lamp. Be sure to check the surroundings before installation. There should be no hostile creatures on it, otherwise the light can attract them to you, and this can end very sadly.

Also, when installing the lamp, you must take into account the terrain. The fact is that in some versions, when installing this item on the street (outside an enclosed space or a cave), the players start to get creepy.Despite the fact that the lamp has the highest brightness in the game, you are unlikely to be able to illuminate the entire courtyard near the house. The luminaire is ideal for illuminating caves, but not good for open areas.

Flashlight

Now you know how to make a lamp in Minecraft. But are there any alternatives to this buggy item? You can, of course, use torches, but there is not enough light from them, but cheap and cheerful.

The second option is to install a simple glowing stone. Minecraft's knowledge base suggests that this natural block also emits light, which in turn allows the lamp to be replaced. The only "but" is that it cannot be turned off during the daytime, and in general, from a design point of view, it is not the best solution. Therefore, it is much better to figure out how to make a lamp in Minecraft.

Among the announced changes in Minecraft, there is information about the future introduction of such a block as a lantern. It will be infinite and will replace all the torches the player has. At the same time, torches will be able to burn out (end). Thus, it can be seen that lamps will always remain relevant, even with the introduction of innovations and improvements. Feel free to craft this item, despite the difficulty of obtaining some of its components, because you still have nothing left but to make a lamp in Minecraft.

A lamp is a block that emits light when activated with a red stone. The brightness of the lamp is the same as that of lava, fire, Jack's lamp - 15 units. She is also capable of melting ice and snow in the vicinity.

Prior to the release of version 1.2.1, players could only use torches for lighting. But after the lamps were introduced into the game, many still continue to use torches, since the lamps, although they burn brighter, but the search for the components is fraught with some difficulties.

To increase the light, you can put several lamps side by side. But this unit cannot work all the time. It is turned on with a switch or switch, which can be installed on the object itself.

Craft

In order to create a lamp, you need four units of red dust and one glowing stone. If there are no problems with the production of the first component, then the second crafting element is quite difficult to find. The glowing stone is made from light dust, which can only be found in the Nether world and can only be obtained with a diamond pickaxe; when using another tool, the block will simply crumble. To create one glowing block, you need four units of light dust.

After all the ingredients are collected, you need to arrange them in the following order on the workbench:

in the first row, put red dust in the center slot;
in the second row we place red dust in the first slot, then a glowing stone, and in the last slot again red dust;
in the third row, place the remaining unit of red dust in the center slot.

Activation

After creating a lamp, it will not immediately light up. To do this, you need to connect it with red dust to electricity. To do this, you need to use a lever, switch, pressure plate, pressure rails, button or redstone circuit.

The easiest activator to make is a button (requires two stone blocks) and a lever. The most materials required for the pressure rails are iron ingots, red dust, and a stone pressure plate. The rules for connecting to electricity are standard, you need the signal to come from the neighboring block. If everything is done correctly, then it will begin to glow.

It is best to attach a switch or red torch to the lamp to save space. These elements can be attached to the block itself. You can even hide the torch so that it is not visible.

Usage

Most often, a lamp is used to illuminate a house, less often during construction or in mines, caves. This item can be attached to any surface such as walls or ceilings. Or make a luminous floor in the house. It all depends on the fantasy of the player.

The lamp can be carried with you, it is not washed off by liquids and is not tied to a specific block. If you break it on purpose or accidentally, then you can get another lighting device from it.

If you install the lamp on a farm where carrots, wheat or potatoes grow, then after turning it off, you can harvest. Also, with the help of a lamp, you can make underground farms. By the way, this unit lights up instantly and turns off with a delay.

Paradoxical as it may seem, but in the modern world, a game that is at the level of the 90s in terms of graphics quality is gaining more and more popularity. Moreover, for many game creators, such an event was a big surprise. And the very same author of the idea, Markus Person, or, as fans call him, "Notch", this project has literally gilded him.

The game gained its first fans, even when it was at the beta stage. Notch just uploaded the game to Stem, where people quickly tried it out and began to master it. After such a sharp "breakthrough", the creator of Minecraft hired assistants (with the money raised) and began to seriously improve the game.

In this article we will talk about such an interesting thing in the game as lamps. Consider how to make a lamp in Minecraft, how it should be positioned. And also what ingredients are used to craft it.

But before answering the question of how to make a lamp in Minecraft, you need to consider the entire system of creating things in this game. And although it seems quite complicated, there are a huge number of sites on the Internet that have guides for crafting things. So, in essence, there are 2 places in the game in which you can do something. This is the player's own inventory, in which there are 4 blocks, for different objects and a workbench in which you can put up to 9 items. By the way, some fan addons have more advanced workbenches, with more blocks to place.

Now let's take a look at how to make a lamp in Minecraft. Initially, we need a workbench, which is made in the character's inventory from 4 blocks of planks. We also need glowing dust, which we will use to make Australia.

By the way, the work of a lama has a number of distinctive features. The other lights in the game are permanent light sources. And they cannot be turned off, the lamp only works if a redstone is connected to it. And after receiving Australia, we put it on the workbench, in the center, and cross it with a redstone.

True, for inexperienced players, the answer to the question of how to make a lamp in Minecraft is not fully disclosed. After all, it is not clear how to get the glowing dust from which the glowing stone (Australia) is made. To get light dust, you have to sweat. After all, it is only in Hell, which is an extremely dangerous place, and it is better not to go there without serious equipment.

Now let's take a look at what the lamp is for in Minecraft. As mentioned earlier, it only works if you connect a redstone to it. This is convenient for creating a homely atmosphere. Even in Minecraft, the lamp is used to create an entourage. When you go to someone's house, you press the switch, everything becomes consecrated. Although the source of alternating light has its drawbacks, in particular, in the dark, mobs can spawn, which does not happen in consecrated areas.

It can also be said that the lamps are used only by hardcore players, because they require costs in manufacturing and placement. And it's much easier to craft a torch or glowstone. And for the installation of other light sources, a complex redstone chain is not required, which is not only expensive to build, but also requires a lot of free space.