Troubleshooting South Park: The Fractured but Whole - Black Screen? Doesn't start? South Park: The Fractured But Whole Won't Start? Is it buggy? Black screen? Is it slowing down? Don't have a Russian language? Low FPS? Gives an error message? - Problem solving South park freezes n

Optimization problems in Ubisoft games are already a tradition. Unfortunately, it was no exception. The game has already been released, but many players have faced a number of problems. South Park: The Fractured But Whole Won't Start? Is it buggy? Black screen? Is it slowing down? Don't have a Russian language? Low FPS? Gives an error message? In this article, we will show you how to solve problems with launching South Park: The Fractured But Whole.

Some of the mistakes in South Park: The Fractured But Whole can be fixed by simple manipulations, but some will not work on their own and you will have to wait for the official patch. But first, let's check if your computer meets the system requirements for the game:

Minimum Requirements

Processor: Intel Core i5 2400 / AMD FX 4320
RAM: 8 GB
Video card: NVIDIA GeForce GTX 560Ti / GTX 650 / GTX 750 / GTX 950 / GTX 1050 / AMD Radeon HD 7850 / R9 270 / R9 370 / RX 460
Disk space: 20 GB

OS: Windows 7, Windows 8.1, Windows 10
Processor: Intel Core i5-4690K / AMD FX-8350
RAM: 8 GB
Video card: NVIDIA GeForce GTX 670 / GTX 750ti / GTX 960 / GTX 1060 / AMD Radeon R9 280X / R9 380 / RX 470
Disk space: 20 GB

Saves are incompatible with the latest South Park update: The Fractured But Whole

Some players noticed that this message appeared after they installed 4K textures. False alarm. If you ignore the message and continue playing, then there will be no problems with the download.

No sound in South Park: The Fractured But Whole

If you are having this problem, you can try setting the default audio quality in the Realtek HD toolbar (16bit, 48kHz). Some built-in sound cards can cause problems with higher quality as most of them cannot actually reproduce it.

Steam Family Sharing does not work for South Park: The Fractured But Whole

Unfortunately South Park: The Fractured But Whole cannot be shared with other Steam users via the Family Sharing option.

South Park: The Fractured But Whole Won't Download

Some gamers have run into an issue where Steam stops downloading South Park: The Fractured But Whole. Once you are sure you have enough hard drive space, try restarting Steam. If that doesn't work, restart your computer and then change the boot region on Steam. If that doesn't work, then it might be a server-side problem.

South Park: The Fractured But Whole incorrectly detects the monitor

If you have multiple monitors connected, there are several outputs - turn off additional monitors or play in windowed mode.

Frame rate in South Park: The Fractured But Whole is locked at 42 FPS

This problem is most common among Nvidia GPU owners. Alas, this is a hardware glitch, so you may have to wait for a patch.

Video card does not support DirectX 11

A number of players have reported receiving the error “your device does not support DirectX 11”. None of the usual troubleshooting methods (new drivers, old drivers, disabling integrated graphics) work.

South Park: The Fractured But Whole takes a very long time to load

If South Park: The Fractured But Whole seems to take too long to load, you can try setting “high” priority for the game in Windows Task Manager.

South Park: The Fractured But Whole Microsoft Store Version Not Working - Error 0x80070005

Many players who purchase a game from the Microsoft Store are unable to launch it. This looks like a problem from Microsoft, but you can try the following: turn off the firewall, update the store app, update the OS, and make sure your time and date are correct.

Direct3D 11.1 API not available

Players still using Windows 7 as their primary operating system may encounter the “Direct3D 11.1 API not available” error. As a solution to this problem, you can update your operating system and install all updates.

South Park: the Fractured But Whole crashes. Low FPS. Freezit. Lags

If you have South Park: The Fractured But Whole slows down or shows a low FPS level, then first of all we advise you to reinstall the video card drivers, from this FPS in South Park: The Fractured But Whole can rise significantly. Also install the latest version of Microsoft Visual C ++ 2010, DirectX and Microsoft Net framework as needed.

If all of the above did not help in any way, and you still experience low FPS and slowdown in the game, then on the first launch, change the graphics settings. First of all, turn off anti-aliasing, and lower the detail and draw range settings in South Park: The Fractured But Whole. You can also turn off the post-processing settings, most often they require a lot of PC resources, and turning them off will significantly increase the performance of the game and not greatly affect the quality of the picture.

It is also worth after installing the game before starting to download the patch of the first day and update the game. Perhaps this will help you avoid most of the problems.

How to enable Russian in South Park: the Fractured But Whole

To include Russian in South Park: The Fractured But Whole: Senua’s Sacrifice, go to

C: \\ Users \\ UserName \\ AppData \\ Local \\ South Park: The Fractured But WholeGame \\ Saved \\ Config \\ WindowsNoEditor \\

And open the Engine.ini file with notepad. Find the line Culture \u003d en_US in it and change en_US to ru_RU

South Park: The Fractured But Whole won't start. Takes off

Most often, problems with the launch of the game arise due to an incorrect or incorrect installation. Make sure there were no errors during installation. If any errors occur during the South Park: The Fractured But Whole installation, cancel it and start the installation again, having previously disabled the antivirus. You also need to remember that you should not have Cyrillic characters on the path to the game installation folder. Use only Latin letters and numbers.

After installation, run the game as Administrator.

Black of black screen in the South Park: The Fractured But Whole

If after launching South Park: The Fractured But Whole you see a black screen, try switching the game to windowed mode by pressing the Alt + Enter key combination. Then go back to full screen mode by pressing the combinations of these keys again.

Black screen in games is most often due to GPU issues. Make sure your graphics card meets the minimum game requirements we described above, and update your graphics card driver as well.

No Russian in South Park: The Fractured But Whole

Officially South Park: The Fractured But Whole has been fully translated into Russian. So it is not recommended to download a third-party crack. If you do not have Russian in the game, try changing the language in the game settings menu. If there is no way to select the Russian language, then reinstall the game with the antivirus disabled.

South Park: the Fractured But Whole crashes to the desktop

Saves not working for South Park: the Fractured But Whole

If the game saves do not work for you, or the game is not saved, make sure that you have enough disk space where the folder with the game saves is located, most often this is the "C" drive - the disk with the OC installed. Also make sure that the path to the save folder has only Latin letters.

South Park: The Fractured But Whole no sound

Before running South Park: The Fractured But Whole, make sure the other program has sound. After that, see if the sound is muted in the settings of the game itself and whether the correct device for playing sound is selected there. Next, while the game is running, open the mixer and check if the sound is muted there.

If South Park: The Fractured but Whole crashes, South Park: The Fractured but Whole won't start, South Park: The Fractured but Whole won't install, controls don't work in South Park: The Fractured but Whole, no sound, errors happen, saves not working in South Park: The Fractured but Whole - we offer you the most common ways to solve these problems.

First, check if your PC meets the minimum system requirements:

OS: Windows 7 / 8.1 / 10 (64-bit)
Processor: Intel Core i5 2400 / AMD FX 4320
Memory: 6 GB
Videocard: 2 GB (GeForce GTX 560Ti / GTX 650 / GTX 750 / GTX 950 / GTX 1050 or AMD Radeon HD 7850 / R9 270 / R9 370 / RX 460)

Be sure to update your graphics card drivers and other software

Before you remember the worst words and express them towards the developers, do not forget to go to the official website of the manufacturer of your video card and download the latest drivers. Often, drivers specially optimized for them are prepared for the release of games. You can also try installing a later version of the drivers if the problem is not resolved by installing the current version.

It is important to remember that you should only download the final versions of video cards - try not to use beta versions, as they may contain a large number of not found and not fixed errors.

Keep in mind that games often require the latest version of DirectX to be installed, which can always be downloaded from the official Microsoft website, for stable operation of games.

South Park: the Fractured but Whole not starting

Many problems with the launch of games happen due to incorrect installation. Check if there were any errors during the installation, try uninstalling the game and running the installer again, having previously disabled the antivirus - files that are often needed for the game to work are deleted by mistake. It is also important to remember that the path to the folder with the installed game should not contain Cyrillic characters - use only Latin letters and numbers for directory names.

It still does not hurt to check if there is enough space on the HDD for installation. You can try to run the game as Administrator in compatibility mode with different versions of Windows.

South Park: the Fractured but Whole crashes. Low FPS. Lags. Friezes. Hangs

The first is to install fresh drivers on the video card, from this the FPS in the game can significantly increase. Also check the workload of the computer in the task manager (opened by pressing CTRL + SHIFT + ESCAPE). If, before starting the game, you see that a process is consuming too many resources, turn off its program or simply end this process from the task manager.

Next, go to the graphics settings in the game. First of all, turn off anti-aliasing and try lowering the post-processing settings. Many of them consume a lot of resources and turning them off will significantly increase performance without significantly affecting the picture quality.

South Park: the Fractured but Whole crashes to the desktop

If South Park: The Fractured but Whole often crashes to the desktop, try to reduce quality of the graphics. It is possible that your computer simply lacks performance and the game may not work correctly. It's also worth checking out the updates - most modern games have a system for automatically installing new patches. Check if this option is disabled in the settings.

Black of black screen in the South Park: The Fractured but Whole

The most common black screen issue is a GPU issue. Check if your graphics card meets the minimum requirements and install the latest drivers. Sometimes a black screen is due to insufficient CPU performance.

If everything is fine with the hardware and it meets the minimum requirements, try switching to another window (ALT + TAB), and then returning to the game window.

South Park: the Fractured but Whole is not installed. Installation hangs

First of all, check if you have enough HDD space for installation. Remember that for the installation program to work correctly, the declared amount of space is required, plus 1-2 gigabytes of free space on the system drive. In general, remember the rule - the system disk should always have at least 2 gigabytes of free space for temporary files. Otherwise, both games and programs may not work correctly or refuse to start at all.

Installation problems can also occur due to a lack of internet connection or its unstable operation. Also, do not forget to suspend the antivirus during the installation of the game - sometimes it interferes with the correct copying of files or deletes them by mistake, considering it as viruses.

Saves not working in South Park: the Fractured but Whole

By analogy with the previous solution, check the availability of free space on the HDD - both on the one where the game is installed and on the system disk. Save files are often stored in the documents folder, which is located separately from the game itself.

Controls not working in South Park: the Fractured but Whole

Sometimes the controls in the game do not work due to the simultaneous connection of multiple input devices. Try disconnecting your controller, or if for some reason you have two keyboards or mice connected, leave only one pair of devices. If your controller does not work, then remember - officially only controllers that are defined as Xbox joysticks support games. If your controller is defined differently, try using programs that emulate Xbox joysticks (for example, x360ce).

Sound does not work in South Park: The Fractured but Whole

Check if the sound works in other programs. After that, check if the sound is muted in the settings of the game itself and if the audio playback device to which your speakers or headset is connected is selected. Next, while the game is running, open the mixer and check if the sound is muted there.

If you are using an external sound card, check the manufacturer's website for new drivers.

Gaming News

3 hours 38 minutes back0 The Lord of the Rings: Gollum will visit PS5 and Xbox Series X 5 hours 9 minutes back0 Rumor: new NVIDIA Ampere graphics cards will be released in the second half of 2020 5 hours 45 minutes back0 Vince Zampella Takes Over at DICE LA - Studio Will Begin New Game 6 hours 25 minutes back0 PUBG Season 5 Storyline

It turned out to be quite demanding on the hardware, despite the rather unpretentious graphics. As in the first part, it is full of various bugs and problems, many of them can be solved using our guide.

We present to your attention the minimum and recommended system requirements, which must meet the configuration of your computer.

System Requirements South Park: The Fractured but Whole

Minimum system requirements:

OS: Windows 7, 8.1, 10 (x64);
Processor: Intel Core i5 2400 or AMD FX 4320;
RAM: 6 GB;
Video card: NVIDIA GeForce GTX 560Ti with 2 GB of video memory or Radeon HD 7850 with 2 GB of video memory;
Hard drive: 20 GB;

Recommended system requirements:

OS: Windows 7, 8.1, 10 (x64);
Processor: Intel Core i5-4690K or AMD FX-8350;
RAM: 8 GB;
Video card: NVIDIA GeForce GTX 670 with 2 GB of video memory or AMD Radeon R9 280X with 2 GB of video memory;
Hard drive: 20 GB;

The requirements may seem a little too high since South Park: TFBW does not seem so resource intensive. It's all the fault of the engine, which will not allow owners of weak computers to try out the game. In terms of optimization, there are not many complaints, but there are several serious bugs that many players who have purchased the game on Steam have encountered. One way or another, if your hardware meets the minimum requirements, then you have already done half of the job. You can find the solution to the rest of the problems later in this article.

Files, drivers and libraries

Before you start looking for your problem, you need to update your video card driver to the latest version:

A prerequisite for the successful functioning of any game is the availability of the latest drivers for all devices in the system. Download the utility Driver Updater to quickly and easily download the latest drivers and install them with one click:

upload Driver Updater and run the program;
perform a system scan (it usually takes no more than five minutes);
update outdated drivers with one click.

WinOptimizer

For complete happiness, you still need to update additional libraries:

Separate list for Microsoft Visual C ++:

(Download)
(Download)
(Download)
(Download)

Having done all these simple manipulations and checking the system requirements, you can be sure that the game will work correctly. However, some bugs and problems still remain. The ways to solve them will be described below.

South Park: The Fractured but Whole Won't Start? Decision

If the game does not start, and your PC fully meets the system requirements, then you should try a few ideas. First, run the game as administrator. Then check if Uplay is working. It even makes sense to uninstall this service and reinstall it - sometimes the problem is in it. Finally, if your computer is equipped with multiple graphics cards, you should make sure that when launching South Park: TFBW, you are using the correct card that can run the game. You can check this in the control panel from your video card manufacturer.

Black screen when launching South Park: The Fractured but Whole? Decision

The most common problem faced by a huge number of people who bought the game. After pressing the "Enter" key on the start screen, the picture turns black, although the sound and the game continue to work. The simplest and most common solution is the Alt + Enter key combination to switch to windowed mode. Then you should go to the settings and return everything as it was. Alternatively, you can find the game configuration file and manually correct the parameters in it. If this does not help, then try to go to the folder with the game and run it as administrator. It is also worth checking the integrity of the cache, whether the latest version of the drivers is installed and whether the correct video card pulls up when starting the game (if there are several of them).

South Park: The Fractured but Whole freezes or freezes? Decision

If you have several video cards, then first check if, for example, a discrete card is used instead of the main one. This is a very common problem in the game that causes a lot of bugs and makes the application very unstable. In some cases, such as in battles, the game may freeze due to certain actions. This is an equally common problem that players face, and there is only one solution to it - to switch to windowed mode via "Alt + Enter". This does not always help, in other cases you will have to boot and try not to perform the actions that led to this error.

In South Park: The Fractured but Whole, does the sound hiss and diverge from the picture?

This bug was fixed mainly for those who ran the game on laptops. This is a rather odd performance issue that can be solved by lowering all settings, especially graphics quality.

Not saving progress in South Park: The Fractured but Whole?

There is a bug in the game - the ability to manually save the process is disabled. This occurs due to the hang of the previous save attempt. You should occasionally watch so that the save icon in the lower right corner does not spin endlessly. If this happens, then you need to roll back to the last save, and check if everything works. If not, you will have to restart the whole game.

If your problem turned out to be more specific, or the method described in this article did not help, then you can ask other users in our "" section. They will help you promptly!

Thank you for your attention!

We present to your attention the minimum and recommended system requirements, which must meet the configuration of your computer.

System Requirements South Park: The Fractured but Whole

Minimum system requirements:

OS: Windows 7, 8.1, 10 (x64);
Processor: Intel Core i5 2400 or AMD FX 4320;
RAM: 6 GB;
Video card: NVIDIA GeForce GTX 560Ti with 2 GB of video memory or Radeon HD 7850 with 2 GB of video memory;
Hard drive: 20 GB;

Recommended system requirements:

OS: Windows 7, 8.1, 10 (x64);
Processor: Intel Core i5-4690K or AMD FX-8350;
RAM: 8 GB;
Video card: NVIDIA GeForce GTX 670 with 2 GB of video memory or AMD Radeon R9 280X with 2 GB of video memory;
Hard drive: 20 GB;

Files, drivers and libraries

Before you start looking for your problem, you need to update your video card driver to the latest version:

upload Driver Updater and run the program;
perform a system scan (it usually takes no more than five minutes);
update outdated drivers with one click.

WinOptimizer

For complete happiness, you still need to update additional libraries:

Separate list for Microsoft Visual C ++:

(Download)
(Download)
(Download)
(Download)

South Park: The Fractured but Whole Won't Start? Decision

Black screen when launching South Park: The Fractured but Whole? Decision

South Park: The Fractured but Whole freezes or freezes? Decision

In South Park: The Fractured but Whole, does the sound hiss and diverge from the picture?

This bug was fixed mainly for those who ran the game on laptops. This is a rather odd performance issue that can be solved by lowering all settings, especially graphics quality.

Not saving progress in South Park: The Fractured but Whole?

If your problem turned out to be more specific, or the method described in this article did not help, then you can ask other users in our "" section. They will help you promptly!

Thank you for your attention!

Today, almost none of the AAA-class games are complete without technical problems and, unfortunately, South Park: The Fractured But Whole is no exception to the rule. Many users complain that it often has a black screen right during the gameplay. In this guide, we are going to show you how you can get rid of this error.

How to remove black screen in South Park: the Fractured But Whole

First Option - Forced Windowed Mode

This method is the simplest and most effective, so we advise you to use it first:

Activate.
Wait until a black screen appears.
Use the Alt + Enter key combination to switch to window mode.
Then open the game options and set the resolution of your monitor.

It is possible that the third step will not lead to the disappearance of the black screen. In this case, it is worth moving on to the following ways to solve this problem.

Second option - Run the game directly

Another fairly simple method related to launching the game directly through its.exe file:

Right click on the name of the game in the Steam library.
Click on the "Properties" option and then click on the "Local Files" tab.
Next, you need to click on the "Browse local files" label.
Then launch the game through the SouthPark_TFBW.exe file.

Option 3 - Set a high priority for the game

If the previous method did not help you, then you should move on to more laborious methods. Don't worry, this option will not affect your computer in any way:

Start the game.
Use the key combination Crtl + Alt + Del after a black screen appears.
Go to Task Manager and find the Processes tab.
Right click on the game and click on the words "Go to details".
Right click on the already highlighted list of games.
Click on the "High Priority" option and return to the game.

As a result, the black screen should disappear.

Fourth option - Change the startup parameter

If your game does not start or a black screen constantly appears, then write the following inscription in the launch parameter shortcut after specifying the path to the game: -window. See the screenshot below for more details.

Fifth option - Reinstall Uplay

If none of the above methods helped you, then all that remains is to uninstall Uplay and then install it again. Fortunately, this program does not weigh very much, and therefore you can pull off this trick in just a few minutes.