See how to install maps for minecraft. How to install maps in minecraft

Do you own your own server in Minecraft? But you are not able to build something worthwhile on your own, and your friends are tired of playing in the monotonous world of "Minecraft"? No problem! In such cases, there is only one way out - download and install the map you like on your server. Especially for you, many players are working on creating maps. You just have to find and download the one you need. Next, you need to transfer it to your server. And how to install a map in Minecraft, will be described in this article.

First, let's figure out what they are. In Minecraft, a map is a kind of system consisting of directories and files of various types, which carries information about the blocks and their location. Maps can be generated an unlimited number of times, but they have a limited size: for example, the tallest building should not exceed 256 blocks in height, and the entire map should not be more than 13 million blocks. But don't be upset, 13 million blocks is a lot. It will take a player several days to research a map of 2-3 million blocks, and what can we say about 13 million. Maps are multiplayer and single player. It is easy to guess that the main criterion for this division is the number of players.

Before you install a map in Minecraft, you need to decide on its choice. It's simple. Minecraft maps are a very good thing. There are "adventure" cards, there are cards for passing. If your main goal is to complete all challenges alone or with friends, maps in Minecraft are a very fun task. And there are cards that carry nothing but a beautiful design. Here you just have to admire the buildings. Hand-built cards are considered the most valuable, and they are also often the most beautiful. They are created without various generators and are used to progress through the game.

Now let's move on to the question: "How to install a map in Minecraft?" The answer to this question is very simple. By the way, I must say right away that there are two types of map installation: in single-user and multi-user modes.

Option 1

The multiplayer mode suggests that for it you need to find a map that must support multiplayer (therefore, the choice is significantly narrowed). Then you need to unzip the archive (most often maps are downloaded as Winrar), then you need to copy all the files from the archive to the / minecraft / world / folder. If you need to replace files, do not be afraid, replace them calmly. Then start your server and wait for the map to fully load. Loading times vary by map size, so be prepared for long wait times.

Option 2

In single-player mode, you also need to download a map, but absolutely any map comparable to your version of the game will do. Then you need to find the "saves" folder. On Windows 7, this folder can be found as follows: write% appdata% in the search bar, then find the .minecrsft / saves folder, and then transfer all the files from the archive to the found folder. On Windows XP, this folder can be found by typing "Run" in the search box, and in the window that opens, write: "% appdata%", then - you know.

This concludes the article, I hope I helped you with a solution to the question of how to install a map in Minecraft.

Instructions

If you feel that Minecraft in its classic incarnation is starting to bore you a little, try playing it on maps other than the standard one. You will find that the choice is unusually wide. You can test your "minecraft" skills on a distant planet or on an abandoned intergalactic station, on flying islands (where there is a high risk of falling into the abyss, losing all your inventory), on a land teeming with pirate treasures and numerous dangers, on a medieval estate, on a huge an airship or a ship, in a tangled maze (full of hostile mobs), in twin towers, etc. The choice in this case is solely yours.

Find on any of the sites that offer software for Minecraft (including numerous add-ons to it) a map that suits your needs and ideas about the ideal gameplay. Just refer only to those sources that are trustworthy. Taking a card from a dubious portal, you may face the fact that it is at least inoperative, and at most, the file with it is infected with a virus. Therefore, carefully check the resource from which you plan to download this kind of material (for example, ask about it from those gamers whose opinion you trust). Only after that, take the risk of taking the archive with the map from there.

In the event that you are not satisfied with the ready-made cards, create your own. Use various mods for this (Too Many Items, Single Player Commands, Zombies Mod Pack, etc.). Come up with an interesting storyline, set the rules (make them visually, on), write in the original name, mark the spawn point of the players and make a starter kit for each of them. Be sure to check if your card is functioning normally. Now get down to installing it. This is done in the same way - regardless of whether it was developed by you personally or downloaded from some resource in a finished form.

If the card is presented in the form of an archive, first unpack it using a special program (WinRAR, 7zip, etc.) - otherwise you will not be able to install it normally. Now find the saves folder in your .minecraft. To search for the game directory, go to the C drive in the Users folder (for 7, 8 or Vista versions of Windows) or Documents and Settings (in XP). In it, find your username, open Application Data there - and you will see the directory you are looking for. Transfer the folder with the map to saves. Make sure that its name does not coincide with those that are already there. Now start the game, click on Single Player from the menu and then select the name of the newly installed card.

This article will focus on how how to install maps in Minecraft... Suppose you downloaded a beautiful card from the Internet, on which you would like to play in a single or with friends, or a friend threw you his creation, not the point. We just want to play it. The Minecraft Russia site team has prepared an instruction for you, thanks to which each of you can easily install absolutely any map.

So, we have downloaded the map we need. Most likely it will be a .zip or .rar archive

We open it with any archiver. Any files and folders can be inside, but we are only interested in the folder in which the file is located level.dat... All of it is the world of Minecraft.

Let's analyze a little the structure of the world:

V level.dat information is stored about the spawn point, the weather in the world, the side, the difficulty, the name of the world, the version of the world generator, the version of the game and several other equally interesting parameters.
In folder region are kept .mca(before Minecraft 1.2 - .mcr) files containing information about blocks in the world. That is, in fact, what we see lies here. One .mca file contains 16x16 chunks and represents one region.
In folder players are kept .dat files with data about players. Inventory, location on the map, bed placement point, hunger level, experience - all this is carefully stored in the format NBT... Naturally, if you delete the .dat file with the player's nickname when he is not in the game, then Minecraft will "forget" about this player, and as soon as he enters the game again, it will be completely empty at the spawn point.
In DIM1 and DIM-1 other measurements are stored such as Lower world and Edge.
data stores various information, for example, data about villages, as well as in-game cards that players have crafted.
File session.lock does not allow two running copies of Minecraft to modify the map files, in order to avoid errors on them. If this protection mechanism did not exist, then with a banal mistake or inattention, you could lose your world forever.

Installing the card

The entire folder with the above elements must be copied to the folder saves which is located in the Minecraft folder.

In order to open the folder with Minecraft, click Start-> Run (or the key combination Win + R), and then drive in there

For the future, this is the root directory of the game and you will have to come here often.

Folder with Minecraft in other OS:

Linux - /home/%username%/.minecraft
Mac OS X - users /% username% / Library / Application Support / .minecraft(if the Library is not visible, you need to press cmd + Shift + G and write the path there)

Helpful Hint: You can open the game folder even faster! How? If Minecraft is already running, then you just need to go to the menu item " Texture packs"(in the options menu, and in older versions it is in the main menu), then press the button" Open folder", after which, in the window that opens, go to a higher level and voila - we are in the folder .minecraft

After you have copied the map to the saves folder, you can start the game, select a new map and play on it. It's very simple, isn't it?

Installing the map on the server

Here we have 2 ways, both are very simple:

Rename the folder with the map to world and drop it into a folder from the server, after deleting / moving the old one world
Copy the folder with the map to the folder with the server, then in the file server.properties edit the "level name" property by driving in the name of our map folder

So we learned install minecraft maps... As you can see, nothing complicated.

If you have already chosen and downloaded an interesting map for the game, then it will not be difficult to install it in Minecraft 1.5.2. Pre-unpack the downloaded set of files with any archiver into an empty folder.

Open it and find the repository with the level.dat file. It is in it that all information about the created game world is stored. Here is the spawn point, the difficulty level, the weather, the name of the world and other important parameters. The same folder contains the region section, which contains the .mca files with information about all the blocks of the map. In the players section, the .dat files store all information about the players (experience and hunger level, inventory, bed placement, and more). DIM1 and DIM-1 have built-in data about the lower, upper and other worlds in Minecraft. The data stores the in-game cards that the players made.

A very important function in this folder is performed by the session.lock file. It protects the map of the game world from unauthorized changes, so that new errors do not arise in the game.

Thus, in order to install the map on "Minecraft", you need to copy and transfer these files to the saves folder. It can be found in Windows by going to "Start" and clicking the "Run" button by entering% appdata% \. Minecraft in the search bar.

If you have a Linux operating system, then the root directory of the game can be found at /home/%username%/.minecraft, Mac OS X - users /% username% / Library / Application Support / .minecraft.

If you are running the Minecraft client, you can open the desired folder through the game menu. To do this, click on the "Texture packs" section in the menu, click on the "Open folder" line and go to the section above.

When the map files are transferred to the saves folder, you can start a new game on the updated Minecraft playing field. To do this, select a new card in the menu.

How to install a map on "Minecraft" 1.5.2 and higher on the server

It is quite easy to create a new map on the server. To do this, the folder with the necessary world files, which was mentioned above, must be renamed to world. It needs to be moved to the server files, replacing the old folder with the same name.

You can go the other way. Copy the unnamed folder with the map to the folder with the server, open the server.properties settings file there and make adjustments to the "level name" line, after the equal sign, type in the name of the folder with the map.

Now you know how to install maps for "Minecraft" on a server and a home computer, and therefore you can further diversify the game life of your character and achieve even greater success.